It’s been awhile since the last update, but it’s funny how easily we lose free time in the summer months. I finished permanently installing the raised panels into the headboard using the fancy panel clips below. I used new screws and attached the clips in new locations. Before tightening all of the clips down I […]
I made some significant progress last night and this morning. The last component to build is the support for the crown molding at the top of the head board. As with my former posts on this project I started with a simple ladder frame to get the desired height. The main purpose of all these […]
Last time I left off with the intermediate trim piece being mocked-up with the second tier raised panel. Now that I decided that is how I wanted to proceed it was time to miter the trim and fasten it to the lower tier. I used screws here to attach the trim to the sub frame […]
